The CMC Triskelion is a fully featured industrial rescue tripod that sets a new benchmark for rapid deployment, ease of use, and versatility. With its 5.5 - 10 ft working height, certification to NFPA and EN standards, and multiple rigging options, the Triskelion delivers greater safety and efficiency for confined space and industrial rescues.
The Triskelion's impressive working height range adapts to fit low-clearance areas and extends to haul patients in full-size litters. Unique features include its compatibility with cable and rope up to 13 mm (1/2 in), anchor points for pulley systems, multiple winch mounting options, rectangular legs with built-in stoppers, tethered push pins, high contrast graphics, pivoting feet, quick-connect webbing hobble strap, and reinforced carry bag for single or two-person transport. The Triskelion is also supported by thoughtful accessories that enhance its capabilities and make it even easier to use.
The Triskelion's modern, user-friendly design increases both the safety and efficiency of each rescue. In the words of CMC School Instructor Doug McElmury, "The Triskelion is easily the most user friendly and practical tripod I have used in my 36 years in technical rescue. From the head to the feet, this well-designed tripod shows that CMC listened to what rescuers wanted and made it a reality".
Triskelion Features:
 Height
 10ft max working height allows rescuers to haul patients from a confined space using a harness or litter
 5.5ft min working height facilitates access to low-clearance areas
 Rigging
 Two head-mounted stainless steel pulleys compatible with cable and rope up to 13 mm (1/2 in)
 Three side-plate anchor points ideal for 4:1s like the CSR2 pulley system
 Three tie-off points for additional rigging or stabilization
 Several mounting options for the Harken LokHead Winch and DBI-Sala Salalift II Winch
 Legs
 Rectangular shape prevents spinning and properly aligns adjustment holes and tripod feet
 Built-in stoppers keep the inner legs from pulling out all the way, allowing full extension without risk of separation
 4 in leg height increments enable maximum tripod extension in height constricted areas
 Pins
 Legs are secured using large, quick-action, ball-lock push pins that are easily handled with gloves
 Push pins reassuringly snap into place and robust lanyards keep them from getting lost or separated
 Graphics
 High contrast graphics are easy to see in low light
 Leg height numbering is clearly communicated in noisy environments
 Additional icons guide winch installation to align with head-mounted pulleys
 Feet
 Pivoting feet adapt the Triskelion to a variety of surfaces and angles
 Feet have non-slip tread for hard floors and spiked tips for soft earth
 Hobble
 Red webbing hobble strap secures all three legs at the base with a single quick-connect Cobra Buckle
 Single webbing strap is lighter than chain and faster than using multiple lengths of material
 Red color is bright and easy to see, drawing attention to the strap and reducing risk of a trip hazard
 Bag
 Includes a reinforced carry bag with a diagram indicating proper orientation for balanced single-person transport
 Easily carried by two people using the end handles, or a single person using the padded center shoulder strap
Triskelion Components:
 Triskelion Tripod
 Hobble Strap
 Carry Bag
 Leg Strap
 User Manual
Triskelion Specifications:
 Min Working Height: 1.7 m (5.5 ft)
 Max Working Height: 3.1 m (10 ft)
 Tripod Weight: 32 kg (70 lb)
 Packed Length in Bag: 2.1 m (7 ft)
 Tripod Footprint:
 Inside Diameter of Feet:
 Minimum Height: 158 cm (62.2 in)
 Maximum Height: 282 cm (111 in)
 Outside Diameter of Feet:
 Minimum Height: 193 cm (76 in)
 Maximum Height: 317 cm (124.8 in)
 MBS:
 Attached directly to head: 36 kN (8,093 lbf)
 Attached to leg over pulley: 22 kN (4946 lbf)
 Certification:
 NFPA - General Use
 EN 795:2012 Type B for Single Person Use
 CEN/TS 16415:2013 Type B for 2 Person Use
Accessories (Sold Separately):
 Equipment Bracket
 Provides additional anchor/tie-off point when attached to the leg
 Attaches quickly and easily using two push-pins equipped with wire lanyards
 Installs on inside or outside of tripod leg, allowing multiple rigging options
 Supports M/A systems, rope devices, and use of pulleys at the Triskelion head
 MBS 22 kN, working load limit of 220 kg (484 lb) based on 10:1 safety factor
 LokHead Winch Adapter
 Enables the Harken LokHead Winch to be mounted and used with the Triskelion
 Quickly and smoothly installed using large, quick-action, ball-lock push pins
 Easier, more refined installation than the traditional u-bolt and anchor strap system
 Self-contained, secure attachment that mounts on inside and outside of legs
 Salalift II Winch Adapter
 Enables the 3M DBI/SALA Salalift II Winch to be mounted and used with the Triskelion
 Quickly and smoothly installed using large, quick-action, ball-lock push pins
 Foot Step Kit (2 Steps)
 Mounts to the lower section of the Triskelion leg, allowing the operator to reach the head after setup
 Quick and safe way to correct problems, adjust rigging, and perform safety checks while fully extended
 Ground Stake Kit (3 Stakes)
 Integrates with the Triskelion feet to provide additional security on soft ground
Click Here for Triskelion Spare Parts (sold separately and available on separate page).
Click Here for the Triskelion PPE inspection form and additional information.